Description
CISCO 2960-XR Series | 48 Port | PoE+ | 2 SFP+ | Stackable | 750W | Managed | WS-C2960XR-48FPD-I
Cisco has always done an amazing job with catering to small and medium business. The Cisco 2960-XR series is another generation to the already popular 2960 series that will enable the typical small to medium business to function at an enterprise level without the enterprise budget. The 2960-XR series switches offer a fixed configuration of Ethernet switches that are not only Gigabit, but also stackable w/ optional module. The 2960-XR was specifically designed for easy deployment and operational efficiency. These switches are also energy cautious and have a large range of IOS software features.
Within the 2960-XR family, the switches come in either 24 or 48 variations and have gigabit Small Form Factor (SFP) or 10G SFP+ uplinks. Each switch is FlexStack Plus ready with optional C2960X-STACK module. This enables the switch to be stacked up to eight switches and can produce 80 Gbps of stack throughput. Along with stacking, each unit will feature USB and Ethernet managed interfaces LAN Lite, and energy management features. Power over Ethernet Plus (PoE+) is available on most models.
Switching capacity on the 2960-XR series come in twenty-two percent higher than the 2960-S units as they have a total capacity of 216 Gbps. Each switch will offer either two 10 gig uplinks or four 1 gig uplinks and zero-touch configuration.
Specifications:
| Manufacturer | Cisco |
|---|---|
| Model # | WS-C2960XR-48FPD-I |
| Condition | Refurbished |
| Ports | 48 x 10/100/1000 (PoE+) + 2 x SFP+ |
| Rack Units | 1RU |
| Port Speed | 10/100/1000 Gigabit Ethernet |
| Forwarding Bandwidth | 108 Gbps Forwarding Bandwidth |
| PoE Budget | 750W |
| Switching Bandwidth | 216 Gbps Switching Bandwidth |
| Uplink Ports | 2 SFP+ |
| Flash | 64MB |
| MAC Address Table Size | 16k (default) |
Details:
| PoE Wattage | Up to 1765W(w/ Optional power supply) |
|---|---|
| DRAM | 256MB DRAM (standard) |
| Fans | Fanless Design |
| VLAN IDs available | 4096 VLANs |
| Max Active VLANs | 1023 |
| Max Stacking Units | 8 |
| Energy | Energy Efficient Ethernet |
| Software | Cisco IOS IP Lite |
| Predicted Reliability | 231,590 hrs MTBF (Mean Time Before Fail) |
| Forwarding Rate | 130.9 Mpps |
| Warranty | Lifetime |
Features:
- Cisco AutoSecure
- Dynamic Host Configuration Protocol (DHCP)
- Stacking Master Configuration Management
- Autonegotiation
- Dynamic Trunking Protocol (DTP)
- Port Aggeration Protocol (PAgP)
- Link Aggeration Protocol (LACP)
- Automatic Media-Department Interface Crossover (MDIX)
- Switching Database Manager
- Local Proxy Address Resolution Protocol (ARP)
- Multicast VLAN Registration (MVR)
- Unidirectional Link Detection Protocol (UDLD)
- VLAN1 Minimization
- Smart Multicast, With Cisco FlexStack-Plus Technology
- Internet Group Management Protocol (IGMP)
- Voice VLAN
- Cisco VLAN Trunking Protocol (VRP)
- Layer 2 Trace Route
- Trivial File Transfer Protocol (TFTP)
- Network Timing PRotocol (NTP)
- Mac-based VLAN Enabling
- Cisco TRUSTSec
- Comprehensive 802.1X
- IPv6 First-Hop Secuirty
- Device Sensor and Device Classifier
- Private VLANs
- Access Control Lists (ACL's)
- Secure Shell (SSH) Protocol
- MAC Address Notification
- Bridge Protocol Data Unit (BPDU)
- IGMP Filtering
- Cross-Stack EtherChannel
- Flexlink
- IEEE 801.1s/w Rapid Spanning Tree Protocol (RSTP)
- Power Redundancy
- Cisco Hot Standby Router Protocol (HSRP)
- Coss-stack QoS
- Rating Limiting?á
- 801.1p Class of Service
- RIPv1, RIPv2, RIPng and EIGRP-Stub
- OSPF
- EIGRPv3-Stub and PIMv6-Stub for IPv6 routing
- Equal-cost routing
- HSRP (Hot Standby Routing Protocol)
- VRRP (Virtual Router Redundancy Protocol)
- PIM (Product Independent Multicast)
Also Included:
- CiscoWorks LAN Management Solution
- Cisco TrustSec
- Cisco Network Assistant
- Cisco Catalyst Smart Operations
- Borderless Networks
Compatible Transceivers:
- GLC-GE-100FX - 100 Mbps
- SFP-10G-SR - 10 Gbps
- SFP-10G-SR-S - 10 Gbps
- SFP-H10GB-CU3M - 10 Gbps
- GLC-T - 10/100/1000 Mbps
- GLC-TE 10/100/1000 Mbps
- GLC-BX-D 1 Gbps
- GLC-BX-U 1 Gbps
- GLC-EX-SMD 1 Gbps
- GLC-LH-SMD 1 Gbps
- GLC-SX-MMD 1 Gbps
- CWDM-SFP-XXXX 1 Gbps
Accessories:
- C2960X-STACK - FlexStack-Plus hot-swappable stacking module
- C2960X-FIBER-STK - FlexStack-Extended Fiber stacking module
- C2960X-HYBRID-STK - FlexStack-Extended Hybrid module, with one copper and one fiber port
- CAB-STK-E-0.5M - Stacking Cable 0.5M Length
- CAB-STK-E-1M - Stacking Cable 1M Length
- CAB-CONSOLE-RJ45 - Console Cable with RJ45 Connector 6 Feet
- CAB-CONSOLE-USB - Console Cable with USB Type A and mini-B connectors 6 Feet
- PWR-CLP - Power Cable Restraining Clip
- RCKMNT-1RU-2KX
Power Supply Options:
- PWR-C2-250WAC - Second FRU power supply and fan for all non-PoE 2960-XR switches, provides 250W AC of power
- PWR-C2-640WAC - Second FRU power supply and fan for all 370W PoE+ 2960-XR switches, provides 640W AC of power
- PWR-C2-1025WAC - Second FRU power supply and fan for all 740W PoE+ 2960-XR switches, provides 1025W AC of power
- PWR-C2-250WAC - Spare FRU power supply and fan for all non-PoE 2960-XR switches, provides 250W AC of power
- PWR-C2-640WAC - Spare FRU power supply and fan for all 370W PoE+ 2960-XR switches, provides 640W AC of power
- PWR-C2-1025WAC - Spare FRU power supply and fan for all 740W PoE+ 2960-XR switches, provides 1025W AC of power
Power Cords (USA):
- CAB-TA-NA= (North America)
- CAB-TA-EU (Europe)
- CAB-TA-AP (Australia)
