Description
CISCO 2960-X Series | 48 Port | PoE+ | 2 SFP+ | LAN Base | Stackable | 370W | 10G | WS-C2960X-48LPD-L
Cisco has always done an amazing job with catering to small and medium business. The Cisco 2960-X series is another generation to the already popular 2960 series that will enable the typical small to medium business to function at an enterprise level without the enterprise budget. The 2960-X series switches offer a fixed configuration of Ethernet switches that are not only Gigabit, but also stackable. The 2960-X was specifically designed for easy deployment and operational efficiency. These switches are also energy cautious and have a large range of IOS software features.
Within the 2960-X family, the switches come in either 24 or 48 variations and have gigabit Small Form Factor (SFP) or 10G SFP+ uplinks. Each switch is equipped with FlexStack Plus. This enables the switch to be stacked up to eight switches and can produce 80 Gbps of stack throughput. Along with stacking, each unit will feature USB and Ethernet managed interfaces, LAN Base or LAN Lite, and energy management features. Power over Ethernet Plus (PoE+) is available on most models.
Switching capacity on the 2960-X series come in twenty-two percent higher than the 2960-S units as they have a total capacity of 216 Gbps. Each switch will offer either two 10 gig uplinks or four 1 gig uplinks and zero-touch configuration as well as IOS software updates when you are deploying the 2960-X switch.
Specifications:
- 48 Port
- 10/100/1000
- PoE+
- 2 Dual Purpose Uplink Ports (10/100/1000 or SFP+)
- Up to 370W total PoE capacity
- EnergyWise Efficient
- LAN Base Image
- 1RU
- 108 Gbps Forwarding Bandwidth
- 216 Gbps Switching Bandwidth
- 128MB Flash
- 64MB DRAM (standard)
- 4096 VLANs
- 130.9 Forwarding Rate
- 277,960 hrs MTBF (Mean Time Before Fail)
Features:
- Cisco AutoSecure
- Dynamic Host Configuration Protocol (DHCP)
- Stacking Master Configuration Management
- Autonegotiation
- Dynamic Trunking Protocol (DTP)
- Port Aggeration Protocol (PAgP)
- Link Aggeration Protocol (LACP)
- Automatic Media-Department Interface Crossover (MDIX)
- Switching Database Manager
- Local Proxy Address Resolution Protocol (ARP)
- Multicast VLAN Registration (MVR)
- Unidirectional Link Detection Protocol (UDLD)
- VLAN1 Minimization
- Smart Multicast, With Cisco FlexStack-Plus Technology
- Internet Group Management Protocol (IGMP)
- Voice VLAN
- Cisco VLAN Trunking Protocol (VRP)
- Layer 2 Trace Route
- Trivial File Transfer Protocol (TFTP)
- Network Timing PRotocol (NTP)
- Mac-based VLAN Enabling
- Cisco TRUSTSec
- Comprehensive 802.1X
- IPv6 First-Hop Secuirty
- Device Sensor and Device Classifier
- Private VLANs
- Access Control Lists (ACL's)
- Secure Shell (SSH) Protocol
- MAC Address Notification
- Bridge Protocol Data Unit (BPDU)
- IGMP Filtering
- Cross-Stack EtherChannel
- Flexlink
- IEEE 801.1s/w Rapid Spanning Tree Protocol (RSTP)
- Power Redundancy
- Cisco Hot Standby Router Protocol (HSRP)
- Coss-stack QoS
- Rating Limiting
- 801.1p Class of Service
Also Included:
- CiscoWorks LAN Management Solution
- Cisco TrustSec
- Cisco Network Assistant
- Cisco Catalyst Smart Operations
- Borderless Networks
Details:
| Warranty: | Lifetime Warranty |
|---|---|
| Series: | Catalyst 2960-X |
| Rack Units: | 1RU |
| PoE Compatibility: | PoE+ |
